 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 813-SL140.0M-10 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL140.0M-10 . TYPE : 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 140.0 MHz Bandpass Filter Low Loss PART NUMBER : 813-SL140.0M-10 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.5 dB Bandwidth at -3.0 dB Bandwidth at -35.0 dB Relative Attenuation: from 10 to 132 MHz from 149 to 260 MHz Amplitude Ripple within fo +/- 3.6MHz Group Delay Variation (Fo +/- 3.6MHz) Absolute Delay at Fo Temperature Coefficient In/Out Return Loss at Fo 40 40 48 45 0.6 100 1.03 -94 Minimum 139.6 8.9 9.0 Typical 140.0 10.5 50 50 9.3 9.9 13.5 1.0 150 dB dB dBp-p nsec sec ppm/C dB Maximum 140.4 11.5 14.5 Units MHz dB ohm ohm MHz MHz MHz *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL140.0M-10 Page 2 of 2 PIN Descriptions IN-11,OUT-5,GROUND-1,2,3,4,6,7,8,9,10,12 FREQUENCY RESPONSE Part No.: 813-SL140.0M-10 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL1400M-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |